Omron CP1L - 12-2007, Operation Manual

Page: 631 / 673

596
Connections to Serial Communications Option Boards
Appendix F
Serial PLC Link Connection Examples
This section provides connection examples for using Serial PLC Link. The communications mode used here is
Serial PLC Link.
Connecting an RS-422A Converter
Note The CP1W-CIF11 is not insulated, so the total transmission distance for the whole transmission path is
50 m max. If the total transmission distance is greater than 50 m, use the insulated NT-AL001-E, and do
not use the CP1W-CIF11. If the NT-AL001-E is used, the total transmission distance for the whole trans-
mission path is 500 m max.
Connection with an RS-232C Port
RS-232C connection is also possible when using a Serial PLC Link to connect two CP1L CPU Units.
RS-232C Option Board
CP1L CPU Unit
(Polling Unit)
RS-422A Converter
(CJ1W-CIF11)
RS-232C Option Board
CP1L CPU Unit
(Polled Unit #0)
CP1M CPU Unit
(Polled Unit #1)
Serial PLC Link
(Total transmission length: 50 m max.)
RS-422A Converter
(CJ1W-CIF11)
Built-in
RS-232C
port
FG 1
SD 2
RD 3
RS 4
CS 5
5V 6
DR 7
ER 8
SG 9
1 FG
2 SD
3 RD
4 RS
5 CS
6 5V
7 DR
8 ER
9 SG
RS-232C
RS-232C
Signal Pin No. Pin No. Signal
CP1L CPU Unit
RS-232C Option Board
CP1L CPU Unit
RS-232C Option Board