Mitsubishi Heavy Industries SRRM40HENG-L, Handbook, Page: 661 / 1106

659
FDFL-H
Model FDFL308HEN-SA
Item
Model
Nominal cooling capacity
(1)
W 7100
Nominal heating capacity
(1)
W 8000
Power source 1 Phase, 220/240V, 50Hz
Cooling input kW 2.99/3.19
Running current (Cooling) A 13.9/14.4
Power factor (Cooling) % 98/92
Heating input kW 2.85/3.01
Running current (Heating) A 13.3/13.7
Power factor (Heating) % 97/92
Inrush current A 95
Noise level dB(A) Hi: 45 Lo: 39 52
Exterior dimensions
mm (650 + 50)
×
1260
×
184 845
×
880
×
340
Height
×
Width
×
Depth
Net weight kg 33 74
Refrigerant equipment
– GT-A5534EN41
×
1
Compressor type & Q’ty
Motor kW – 2.5
Starting method – Line starting
Heat exchanger Louver fines & inner grooved tubing Slitted fins & bare tubing
Refrigerant control Capillary tube
Refrigerant R22
Quantity kg Holding charged 1.4 [Pre-charged up to the piping length of 5m]
Refrigerant oil
r
– 1.45 [BARREL FREEZE32SAM]
Defrost control MC controlled de-icer
High pressure control High pressure switch
Air handling equipment
Fan type & Q’ty
Multiblade centrifugal fan
×
4 Propeller fan
×
1
Motor W 35
×
2 55
×
1
Starting method Line starting Line starting
Air flow (Standard) CMM Hi: 16.5 Lo: 11.5 58
Fresh air intake Not possible –
Air filter, Q’ty Polypropylene net
×
2 (Washable) –
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber mount (for compressor)
Electric heater W – 40 (Crank case heater)
Operation control
Wired remote control switch
Operation switch (Optional : RCD-H-E) – (Indoor unit side)
Room temperature control Thermostat by electronics –
Safety equipment
Internal thermostat for fan motor. Internal thermostat for fan motor. hermostat for
fan motor. Frost protection thermostat. Abnormal discharge temperature protection.
Installation data mm
Liquid line:
φ
9.52 (3/8
″
) Gas line:
φ
15.88 (5/8
″
)
Refrigerant piping size (in)
Connecting method Flare piping
Drain hose (Connectable with VP20) –
Insulation for piping Necessary (both Liquid & Gas lines)
Accessories Mounting kit.
Optional parts –
(2) This packaged air-conditioner is manufactured and tested in conformity with the following standard.
JIS B8616 “UNITARY AIR-CONDITIONERS”
(3) The operation data indicate when the air-conditioner is operated at 220/240V 50Hz.
Item Indoor air temperature Outdoor air temperature
Standards
Operation DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C
Heating 20˚C – 7˚C 6˚C
ISO-T1, JIS B8616
Operation data
(3)
FDFL308HEN-SA
FDFL308-A FDC308HEN3
Notes (1) The data are measured at the following conditions.