Mitsubishi Heavy Industries SRRM40HENG-L, Handbook, Page: 578 / 1106

576
FDR-H
Pin (B) Panel outer
frame
Panel inner frame
Pin (A)
4
3
1
2
Panel
inner frame
Remove
Panel
outer frame
(9) Installation of ornament panel
<Case of silent panel>
i) Accessory
ii) Installation procedures
(a) Remove the inner frame of panel
¡
How to remove the panel inner frame
1 Detach from pins (A) in the order of arrow 1
→
2 .
2
Open slightly as the arrow
3
and move toward the arrow
4
and detach from pin (B).
Name Q'ty Position
Round head set
screw (M5
×
35)
4 pcs. Securing the panel
(b) Install the panel outer frame on the main unit.
¡
Steps of installation
1
Secure the panel tentatively with 2 of 4 panel set screws (panel accessory) as shown above.
2
When the panel is supported with a pair of set screws, slide it in the arrow direction.
[Note: Panel outer frame has the orientation.]
3
Lock the former 2 and remaining 2 set screws.
4
Install the panel inner frame in the reverse order of removal.
<Case of canvas panel>
See installation manual which is equipped with canvas panel.
1
3
3
1
Main unit
Panel inner frame
Panel outer frame
Temporary
setting
Abt. 30 mm