Mitsubishi Heavy Industries SRRM40HENG-L, Handbook, Page: 412 / 1106

410
FDEN-H
(2) Alternative refrigerant R407C use models
Model FDENP208HEN-S
(2) This packaged air-conditioner is manufactured and tested in conformity with the following standard. JIS B8616 “UNITARY AIR-CONDITIONERS”
(3) The operation data indicate when the air-conditioner is operated at 220/240V 50Hz.
(4) Indicates the value at mild mode .
Notes (1) The data are measured at the following conditions.
Item Indoor air temperature Outdoor air temperature
Standards
Operation DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C
Heating 20˚C – 7˚C 6˚C
ISO-T1, JIS B8616
Operation data
(3)
Item
Model
FDEN208H FDCP208HEN3A
Nominal cooling capacity
(1)
W 5000
Nominal heating capacity (1) W 5400
Power source 1 Phase, 220/240V, 50Hz
Cooling input kW 2.08/2.15
Running current (Cooling) A 9.5/9.6
Power factor (Cooling) % 99/93
Heating input kW 1.98/2.12
Running current (Heating) A 9.3/9.5
Power factor (Heating) % 97/93
Inrush current (L.R.A) A 55
Noise level
(4)
dB(A) Hi: 43 Lo: 38 52
Exterior dimensions
mm 184
×
1000
×
650 690
×
880
×
290
Height
×
Width
×
Depth
Net weight kg 22 49
Refrigerant equipment
–
RM5523HNE5
×
1
Compressor type & Q’ty
Motor kW –
1.7
Starting method – Line starting
Heat exchanger Louver fines & inner grooved tubing Slitted fines & bare tubing
Refrigerant control Capillary tube
Refrigerant R407C
Quantity kg Holding charged 0.98 [Pre-charged up to the piping length of 0m]
Refrigerant oil
r
–
0.7 (MA32)
Defrost control MC controlled de-icer
High pressure control High pressure switch
Air handling equipment
Fan type & Q’ty
Multiblade centrifugal fan
×
2 Propeller fan
×
1
Motor W 40
×
1 55
×
1
Starting method Line starting Line starting
Air flow (Standard) CMM Hi:14 Lo:10 56
Fresh air intake
Unavailable –
Air filter, Q’ty Polypropylene net
×
2 (washable) –
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber mount (for compressor)
Electric heater W – 20 (Crank case heater)
Operation control
Operation switch Wireless remote control switch – (Indoor unit side)
Room temperature control Thermostat by electronics –
Safety equipment Internal thermostat for fan motor. Internal thermostat for fan motor.
Frost protection thermostat. Thermostat for discharge temperature.
Installation data mm
Liquid line:
φ
6.35 (1/4
″
) Gas line:
φ
15.88 (5/8
″
)
Refrigerant piping size (in)
Connecting method Flare piping
Drain hose
(Connectable with VP20) –
Insulation for piping Necessary (both Liquid & Gas lines)
Accessories Mounting kit. Wireless remote controller
Optional parts –
FDENP208HEN-S