Mitsubishi Heavy Industries SRRM40HENG-L, Handbook, Page: 593 / 1106

591
FDU-H
Item
Model
FDU508-A FDC506HES3
Nominal cooling capacity (1) ISO-T1
W
12500/14000
ISO-T3 11900
Nominal heating capacity (1) ISO-T1 W 12800/14400
Power source 3 Phase, 380-415V 50Hz, 380V 60Hz
Cooling input kW 5.01/5.03/6.03
Running current (Cooling) A 10.3/10.3/11.5
Power factor (Cooling) % 74/68/80
Heating input kW 4.63/4.67/5.61
Running current (Heating) A 9.5/9.6/10.7
Power factor (Heating) % 74/68/80
Cooling input kW 6.63
Running current (Cooling) A 12.5
Power factor (Cooling) % 81
Inrush current (L.R.A) A 68
Noise level dB(A) 45/47 59
Exterior dimensions
mm 360
×
1200
×
830 1250
×
950
×
340
Height
×
Width
×
Depth
Net weight kg 62 91
Refrigerant equipment
– RC5563ESE2
×
1
Compressor type & Q’ty
Motor kW –
3.73
Starting method – Line starting
Heat exchanger Louver fins & inner grooved tubing Slitted fins & bare tubing
Refrigerant control Capillary tube
Refrigerant R22
Quantity kg Holding charged 2.3 [Pre-charged up to the piping length of 5m]
Refrigerant oil
r
– 2.07 (SUNISO 3GS)
Defrost control IC controlled de-icer
High pressure control High pressure regulator valve
Air handling equipment
Fan type & Q’ty
Multiblade centrifugal fan
×
2 Propeller fan
×
2
Motor W 230
×
1 60
×
2
Starting method Line starting Line starting
Air flow (Standard) CMM 34/40 100/110
Available static pressure Pa
Standard: 100 (10), Max 200 (20) –
(mmAq)
Fresh air intake Available –
Air filter, Q’ty Field purchased –
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber mount (for compressor)
Electric heater W – 40 (Crank case heater)
Operation control Wired remote control switch
Operation switch (Optional: RCD-H-E) – (Indoor unit side)
Room temperature control Thermostat by electronics –
Safety equipment
Internal thermostat for fan motor. Internal thermostat for fan motor.
Frost protection thermostat.
Installation data mm
Liquid line:
φ
9.52 (3/8
″
) Gas line:
φ
19.05 (3/4
″
)
Refrigerant piping size (in)
Connecting method Flare piping
Drain hose
(Connectable with VP25) –
Insulation for piping Necessary (both Liquid & Gas lines)
Accessories Mounting kit.
Optional parts –
Operation data
(3)
Model FDU508HES-A
ISO-T1
ISO-T3
Item Indoor air temperature Outdoor air temperature
Standards
Operation DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C
Heating 20˚C – 7˚C 6˚C
ISO-T1, JIS B8616
Cooling 29˚C 19˚C 46˚C 24˚C ISO-T3, SASO
(2) This packaged air-conditioner is manufactured and tested in conformity with the following standard.
JIS B8616 “UNITARY AIR-CONDITIONERS”
(3) The operation data indicate when the air-conditioner is operated at 380V 50Hz/415V 50Hz/380V 60Hz.
Notes (1) The data are measured at the following conditions.
FDU508HES-A
Internal protector for compressor.
Internal thermostat for fan motor.
Internal pressure relief valve for compressor.