Mitsubishi Heavy Industries SRRM40HENG-L, Handbook, Page: 660 / 1106

658
FDFL-H
17.2 SELECTION DATA
17.2.1 Specifications
Model FDFL258HEN-SA
Item
Model
Nominal cooling capacity
(1)
W 5700
Nominal heating capacity (1) W 6100
Power source 1 Phase, 220/240V, 50Hz
Cooling input kW 2.04/2.15
Running current (Cooling) A 9.4/9.4
Power factor (Cooling) % 99/95
Heating input kW 1.94/2.09
Running current (Heating) A 9.1/9.2
Power factor (Heating) % 97/95
Inrush current A 51
Noise level dB(A) Hi: 44 Lo: 39 52
Exterior dimensions
mm (650 + 50)
×
1260
×
184 845
×
880
×
340
Height
×
Width
×
Depth
Net weight kg 33 55
Refrigerant equipment
– RM5526GNE4
×
1
Compressor type & Q’ty
Motor kW – 1.9
Starting method – Line starting
Heat exchanger
Louver fines & inner grooved tubing Slitted fins & bare tubing
Refrigerant control Capillary tube
Refrigerant R22
Quantity kg Holding charged 1.1 [Pre-charged up to the piping length of 5m]
Refrigerant oil
r
– 0.7 [BARREL FREEZE32SAM]
Defrost control MC controlled de-icer
High pressure control High pressure switch
Air handling equipment
Fan type & Q’ty
Multiblade centrifugal fan
×
4 Propeller fan
×
1
Motor W 25
×
2 55
×
1
Starting method Line starting Line starting
Air flow (Standard) CMM Hi: 16 Lo: 10.5 56
Fresh air intake Not possible –
Air filter, Q’ty Polypropylene net
×
2 (Washable) –
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber mount (for compressor)
Electric heater W – 20 (Crank case heater)
Operation control
`
Wired remote control switch
Operation switch (Optional : RCD-H-E) – (Indoor unit side)
Room temperature control Thermostat by electronics –
Safety equipment
Internal thermostat for fan motor.
Internal thermostat for fan motor.
hermostat for
fan motor.
Frost protection thermostat. Abnormal discharge temperature protection.
Installation data mm
Liquid line:
φ
9.52 (3/8
″
) Gas line:
φ
15.88 (5/8
″
)
Refrigerant piping size (in)
Connecting method Flare piping
Drain hose
(Connectable with VP20) –
Insulation for piping Necessary (both Liquid & Gas lines)
Accessories Mounting kit.
Optional parts –
(2) This packaged air-conditioner is manufactured and tested in conformity with the following standard.
JIS B8616 “UNITARY AIR-CONDITIONERS”
(3) The operation data indicate when the air-conditioner is operated at 220/240V 50Hz.
Notes (1) The data are measured at the following conditions.
Item Indoor air temperature Outdoor air temperature
Standards
Operation DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C
Heating 20˚C – 7˚C 6˚C
ISO-T1, JIS B8616
Operation data
(3)
FDFL258HEN-SA
FDFL258-A FDC258HEN3A