Mitsubishi Heavy Industries SRRM40HENG-L, Handbook, Page: 1034 / 1106

1032
FDC-HKXR
20.4 OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER
(1) Remote controller (Optional parts)
FDR,FDUM,FDFL and FDFU series are not provided with AUTO SWING switch.
FILTER
RESET
CHECK
F A N
SPEED
A U T O
SWING
TIMER
SET
MODE
T E M P
T I M E
PROGRAM TIMER
ON OFF
P M
A M
SET TEMP
Lo
Mi
Hi
FAN
CENTER REMOTE F I L T E R
DRYCOOLFANHOT KEEP
FILTER AUTO LIFT
Filter reset switch
Use this switch to reset (erase) the filter
sign display.
(Press the switch after cleaning the air filter.)
Filter sign
When this sign is indicated, clean the filter.
Remote display
This is displayed when the unit is controlled
with an individual controller during normal operation.
(Also displayed when the air conditioner is stopped.)
Inspection switch
Use this switch when servicing the unit.
Operation mode display
Fan speed display
Displays the fan speed that has been set.
Operation/
Inspection indicator lamp
During operation: Green lamp flashes.
In case of error: Red lamp flashes.
On/Off switch
Fan speed switch
Use this switch to set a fan speed.
Mode switch
Cover
Heating
preparation display
Timer switch
Use this switch when selecting contents of timer operation.
Set switch
Use this switch to set a time for the timer.
Temperature/
Time setting switch
Auto swing switch
Auto swing display
Indicates the swing louver condition.
Setting
temperature display
Displays the temperature
that has been set.
Return air
temperature display
Displays the return air temperature.
Note
Outdoor No.
Central display
This is displayed when the unit is
controlled with the optional central console.
Timer operation display
Contents of timer operation are displayed.
(Also displayed when the air conditioner
is stopped.)
Use this switch to start or stop the
air conditioner. First push on the
switch starts the unit and second
push stops it. (The switch can be
operated without opening the cover.)
Indicated value may be different
from actual reading on a thermometer
or other instrument but this is
notnecessarily an error.
Use this switch to select operation
modes.
Use this switch to operate or stop
the swing louver.
Use this switch to set the room
temperature or time on the timer.
Displays the operation mode that
has been selected.
AUTO
Panel shown below will appear if you open the cover. All contents of display on the LCD are indicated simultaneously for
the purpose of explanation.
Pull the knob on the cover to this side to open it downward.