Mitsubishi Heavy Industries SRRM40HENG-L, Handbook, Page: 584 / 1106

582
FDU-H
15.2 SELECTION DATA
15.2.1 Specifications
Model FDU308HEN-SA
Item
Model
FDU308-A FDC308HEN3
Nominal cooling capacity (1)
W
7100
Nominal heating capacity (1)
W
8000
Power source 1 Phase, 220/240V, 50Hz
Cooling input kW 3.20/3.40
Running current (Cooling) A 14.8/15.4
Power factor (Cooling) % 98/92
Heating input kW 3.06/3.22
Running current (Heating) A 14.2/14.7
Power factor (Heating) % 98/91
Inrush current (L.R.A) A 95
Noise level dB(A) 41 52
Exterior dimensions
mm 360
×
820
×
830 845
×
880
×
340
Height
×
Width
×
Depth
Net weight kg 48 74
Refrigerant equipment
– GT-A5534EN41
×
1
Compressor type & Q’ty
Motor kW – 2.5
Starting method – Line starting
Heat exchanger Louver fines & inner grooved tubing Slitted fins & bare tubing
Refrigerant control Capillary tube
Refrigerant R22
Quantity kg Holding charged 1.4 [Pre-charged up to the piping length of 5m]
Refrigerant oil
r
– 1.45 (BARREL FREEZE 32SAM)
Defrost control MC controlled de-icer
High pressure control High pressure switch
Air handling equipment
Fan type & Q’ty
Multiblade centrifugal fan
×
2 Propeller fan
×
1
Motor W 130
×
1 55
×
1
Starting method Line starting Line starting
Air flow (Standard) CMM 20 58
Available static pressure Pa
Standard: 100 (10), Max: 200 (20) –
(mmAq)
Fresh air intake Available –
Air filter, Q’ty Field purchased –
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber mount (for compressor)
Electric heater W – 33(Crank case heater)
Operation control Wired remote control switch
Operation switch (Optional: RCD-H-E) – (Indoor unit side)
Room temperature control Thermostat by electronics –
Safety equipment Internal thermostat for fan motor. Internal thermostat for fan motor.
Frost protection thermostat. Abnormal discharge temperature protection.
Installation data mm
Liquid line:
φ
9.52 (3/8
″
) Gas line:
φ
15.88 (5/8
″
)
Refrigerant piping size (in)
Connecting method Flare piping
Drain hose
(Connectable with VP25) –
Insulation for piping Necessary (both Liquid & Gas lines)
Accessories Mounting kit.
Optional parts –
(2) This packaged air-conditioner is manufactured and tested in conformity with the following standard.
JIS B8616 “UNITARY AIR-CONDITIONERS”
(3) The operation data indicate when the air-conditioner is operated at 220/240V 50Hz.
Notes (1) The data are measured at the following conditions.
Item Indoor air temperature Outdoor air temperature
Standards
Operation DB WB DB WB
Cooling 27˚C 19˚C 35˚C 24˚C
Heating 20˚C – 7˚C 6˚C
ISO-T1, JIS B8616
Operation data
(3)
FDU308HEN-SA