Mitsubishi Heavy Industries SRRM40HENG-L, Handbook, Page: 373 / 1106

371
FDT(N)-C
Item
Model
FDT508-A FDC506CES3
Nominal cooling capacity (1) ISO-T1
W
12500/14000
ISO-T3 10600/11900
Power source 3 Phase, 380-415V 50Hz or 380V 50Hz/415V 50Hz, 380V 60Hz
Cooling input kW 4.87/4.87/5.83
Running current (Cooling) A 10.0/10.0/11.0
Power factor (Cooling) % 74/68/81
Cooling input kW 5.42/5.42/6.43
Running current (Cooling) A 11.3/11.3/12.0
Power factor (Cooling) % 73/67/81
Inrush current (L.R.A) A 68
Noise level (4) dB(A) Hi:49 Lo:43 59
Exterior dimensions
mm
Unit 320
×
840
×
840
1250
×
950
×
340
Height
×
Width
×
Depth Panel 30
×
950
×
950
Net weight kg 36 (Unit:30 Panel:6) 85
Refrigerant equipment
– RC5563ESE2
×
1
Compressor type & Q’ty
Motor kW – 3.73
Starting method – Line starting
Heat exchanger Louver fins & inner grooved tubing Slitted fines & bare tubing
Refrigerant control – Capillary tube
Refrigerant R22
Quantity kg Holding charged 1.85 [Pre-charged up to the piping length of 5m]
Refrigerant oil
r
– 2.07 (SUNISO 3GS)
High pressure control High pressure regulator valve
Air handling equipment
Fan type & Q’ty
Turbo fan
×
1 Propeller fan
×
2
Motor W 130
×
1 60
×
2
Starting method Line starting Line starting
Air flow (Standard) CMM Hi:28 Lo:20 100/110
Fresh air intake Available –
Air filter, Q’ty Long life filter
×
1 (washable) –
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber mount (for compressor)
Electric heater W – 40 (Crank case heater)
Operation control Wired remote control switch
Operation switch (Optional:RCD-C-S-E) – (Indoor unit side)
Room temperature control Thermostat by electronics –
Safety equipment
Internal thermostat for fan motor.
Frost protection thermostat.
Installation data mm
Liquid line:
φ
9.52 (3/8
″
) Gas line:
φ
19.05 (3/4
″
)
Refrigerant piping size (in)
Connecting method Flare piping
Drain hose
(Connectable with VP25) –
Insulation for piping Necessary (both Liquid & Gas lines)
Accessories Mounting kit.
Optional parts Decorative Panel
Model FDT508CES-A
Operation data
(3)
ISO-T1
ISO-T3
Internal protector for compressor.
Internal thermostat for fan motor.
Internal Pressure relief valve for compressor.
Item Indoor air temperature Outdoor air temperature
Standards
Operation DB WB DB WB
Cooling
27˚C 19˚C 35˚C 24˚C ISO-T1, JIS B8616
29˚C 19˚C 46˚C 24˚C ISO-T3, SASO
(2) This packaged air-conditioner is manufactured and tested in conformity with the following standard.
JIS B8616 “UNITARY AIR-CONDITIONERS”
(3) The operation data indicate when the air-conditioner is operated at 380/415V 50Hz and 380V 60Hz respectively.
(4) Indicates the value at mild mode.
Notes (1) The data are measured at the following conditions.
FDT508CES-A