Keysight Technologies E5260 Series, Programming Manual

Page: 255 / 350

Keysight E5260/E5270 Programming Guide, Edition 4 4- 71
Command Reference
Command Reference
58 : Returns the trigger settings:
[TGP port , terminal , polarity , type ]
[;TGP port , terminal , polarity , type ]
:
[;TGP port , terminal , polarity , type ]
TGSI mode ;TGXO mode ;TGSO mode ;TGMO mode <CR/LF^EOI>
59 : Returns the multi channel sweep source settings:
WNX n , chnum , mode , range , start , stop [, comp [, pcomp ]]
[;WNX n , chnum , mode , range , start , stop [, comp [, pcomp ]]]
:
[;WNX n , chnum , mode , range , start , stop [, comp [, pcomp ]]]
<CR/LF^EOI>
If no multi channel sweep source is set, the query response is:
WNX<CR/LF^EOI>
60 : Returns the time stamp setting:
TSC enable <CR/LF^EOI>
61 : Returns the display settings:
RED enable ;
KLC lock ;
DFM format ;
SPA1, param ;
SPA2, param ;
MPA param ;
SCH chnum ;
MCH chnum <CR/LF^EOI>
62 : Available only for the Keysight E5270B with HRSMU and ASU.
Returns the ASU connection path:
SAP chnum , path
[;SAP chnum , path ]
:
[;SAP chnum , path ]<CR/LF^EOI>
If no channel is connected to ASU.
SAP<CR/LF^EOI>