Keysight Technologies E5260 Series, Programming Manual

Page: 258 / 350

4- 74 Keysight E5260/E5270 Programming Guide, Edition 4
Command Reference
Command Reference
LSM
The LSM command enables or disables the automatic abort function for the linear
search measurement (MM14). The automatic abort function stops the measurement
when one of the following conditions occurs:
• Compliance on the measurement channel
• Compliance on the non-measurement channel
• Overflow on the AD converter
• Oscillation on any channel
This command also sets the post search condition for the linear search sources. After
the search measurement is normally completed, the linear search sources force the
value specified by the
post parameter.
If the search operation is stopped by the automatic abort function, the linear search
sources force the start value after search.
Syntax
LSM abort [, post ]
Parameters
abort : Automatic abort function. Integer expression.
1: Disables the function. Initial setting.
2: Enables the function.
post : Source output value after the measurement is normally completed.
Integer expression.
1: Start value. Initial setting.
2: Stop value.
3: Output value when the search target value is obtained.
If this parameter is not specified, the search source forces the start
value.
Example
Statements
OUTPUT @E5270;"LSM 2"
OUTPUT @E5270;"LSM 2,3"