Keysight Technologies E5260 Series, Programming Manual

Page: 53 / 350

Keysight E5260/E5270 Programming Guide, Edition 4 1- 41
Programming Basics
Programming Tips
Programming Tips
This section provides the following additional information on creating measurement
programs. It is useful for checking the operation status, improving the measurement
speed, and so on.
• “To Confirm the Operation”
• “To Confirm the Command Completion”
• “To Disable the Auto Calibration”
• “To Optimize the Measurement Range”
• “To Optimize the Integration Time”
• “To Disable the ADC Zero Function”
• “To Optimize the Source/Measurement Wait Time”
• “To Use the Internal Program Memory”
• “To Get Time Data with the Best Resolution”
• “To Use Sweep Source as a Constant Source”
• “To Start Measurements Simultaneously”
• “To Interrupt Command Execution”
• “To Use Programs for Keysight 4142B”
• “To Use Programs for Keysight 4155/4156”
• “To Use Programs for Keysight E5270A”