Keysight Technologies E5260 Series, Programming Manual

Page: 288 / 350

4- 104 Keysight E5260/E5270 Programming Guide, Edition 4
Command Reference
Command Reference
SCH
The SCH command selects the source channel for the data is displayed on the front
panel LCD.
Syntax
SCH chnum
Parameters
chnum : Source channel number. The value must be slot number where the
module has been installed. Integer expression. 1 to 8 (1 and 5 are not
available for HPSMU). See
Table 4-1 on page 4-9 .
Example
Statements
OUTPUT @E5270;"SCH 1"
SCR
The SCR command scratches the specified program from the internal program
memory.
Syntax
SCR [ pnum ]
Parameters
pnum : Program number. Numeric expression. 1 to 2000.
If you do not specify this parameter, this command scratches all
programs stored in the internal program memory.
Example
Statements
OUTPUT @E5270;"SCR"
OUTPUT @E5270;"SCR 5"