Keysight Technologies E5260 Series, Programming Manual

Page: 254 / 350

4- 70 Keysight E5260/E5270 Programming Guide, Edition 4
Command Reference
Command Reference
51 : Returns the binary search measurement settings:
BSM mode , past ;BST hold , delay ;BSVM mode
[;BGI chnum , mode , condition , Irange , Itarget ] or
[;BGV chnum , mode , condition , Vrange , Vtarget ]
[;BSV chnum , range , start , stop [, Icomp ]] or
[;BSI chnum , range , start , stop [, Vcomp ]]
[;BSSV chnum , polarity , offset [, Icomp ]] or
[;BSSI chnum , polarity , offset [, Vcomp ]]
<CR/LF^EOI>
52 : Not used.
53 : Returns the SMU series resistor ON/OFF status:
SSR chnum , mode
[;SSR chnum , mode ]
:
[;SSR chnum , mode ]<CR/LF^EOI>
54 : Returns the auto ranging mode status:
RM chnum , mode [, rate ]
[;RM chnum , mode [, rate ]]
:
[;RM chnum , mode [, rate ]]<CR/LF^EOI>
55 : Available only for the Keysight E5270B. Returns the A/D converter
settings:
AAD chnum , type
[;AAD chnum , type ]
:
[;AAD chnum , type ]<CR/LF^EOI>
56 : Available only for the Keysight E5270B. Returns the ADC averaging
or integration time setting:
AIT0, mode , time ;AIT1, mode , time ;
AZ mode <CR/LF^EOI>
57 : Returns the source/measurement wait time settings:
WAT0, set_set ;WAT1, set_meas <CR/LF^EOI>