IAI PSEL, Operation Manual

Page: 779 / 1062

[10] Position Operation
285
z
PAXS (Read axis pattern)
Command, declaration Extension
condition
(LD, A, O, AB, OB)
Input condition
(I/O, flag)
Command,
declaration
Operand 1 Operand 2
Output
(Output, flag)
E N, Cnd Cmnd Operand 1 Operand 2 Pst
Optional Optional PAXS
Variable
number
Position
number
CP
Applicable models
All models [Refer to Section 5.1 for details of models]
{
[Function] Store the axis pattern at the position specified in operand 2 to the variable
specified in operand 1.
[Example 1] PAXS 1 98 Read the axis pattern at position 98 to variable 1.
If the position is given as follows, “3” (binary 0011)
will be read to variable 1.
[Example 2] LET 1 3 Assign 3 to variable 1.
LET 2 101 Assign 101 to variable 2.
PAXS *1 *2 Read the axis pattern at the content of variable 2
(position 101) to the content of variable 1 (variable 3).
If the point is given as follows, “8” (binary 1000) will
be stored in variable 3.
The table below shows different positions and corresponding values stored in a variable.