IAI PSEL, Operation Manual

Page: 743 / 1062

[6] T
imer
249
z
TIMC (Cancel timer)
Command, declaration Extension
condition
(LD, A, O, AB, OB)
Input condition
(I/O, flag)
Command,
declaration
Operand 1 Operand 2
Output
(Output, flag)
E N, Cnd Cmnd Operand 1 Operand 2 Pst
Optional Optional TIMC
Program
number
Prohibited CP
Applicable models
All models [Refer to Section 5.1 for details of models]
{
[Function] Cancel a timer in other program running in parallel.
(Note) Timers in TIMW, WTON, WTOF and READ commands can be cancelled. In the
case of WTON, WTOF and READ commands, even if timeout is not specified it is
assumed that an unlimited timer has been specified and the wait time will be
cancelled.
[Example 1] TIMC 10 Cancel the wait time in program 10.
[Example 2] LET 1 10 Assign 10 to variable 1.
TIMC *1 Cancel the wait time in the content of variable 1
(program 10).
[Example 3] Program 1 Program 10
: :
: WTON 8 20 Program 10 waits for input 8 for 20
: (Wait for input 8) seconds.
TIMC 10 (Wait for input 8) Cancel the wait time in program 10.
: :
(Note) The steps shown in the above example represent those executed simultaneously
in different programs.