Configuration
Configuring the OpenCom 100
82
7.2.8 Codes for IP Configuration
The IP configuration of the OpenCom 100 is performed on the Web console in the
Configurator
, in the
NET Configuration: LAN
menu.
In the event that the IP configuration of the OpenCom 100 has to be changed and
access via the Web console is not possible, you can also use a code digit procedure
to change these basic settings. Entry can be made from an analogue telephone, an
ISDN telephone and from system telephones.
Set IP address
H
*182
Z
(system PIN)
*
Z
(www)
*
Z
(xxx)
*
Z
(yyy)
*
Z
(zzz)
#
Set NET mask
H
*183
Z
(system PIN)
*
Z
(www)
*
Z
(xxx)
*
Z
(yyy)
*
Z
(zzz)
#
Example
Enter:
H*1830000*192*168
*99*254#
If required, initiate a system restart with this procedure:
H
*
1
8
5
Z
(system PIN)
#
Use the PIN you entered in the
dialogue box for initial access
. The factory setting is
“0000”.
7.2.9 Saving and Loading the Configuration
Configurations are saved in a file archive and can be loaded to the OpenCom 100
either locally from a connected configuration PC, or by remote configuration.
The following configuration and customer data can be saved and loaded again:
■
Telephony and network parameters
■
User data
Summary of Contents for OpenCom 130
Page 1: ...130 OpenCom100 131 150 Mounting and Commissioning User Guide ...
Page 10: ...8 ...
Page 202: ...Index 200 Notes ...
Page 203: ......
