Configuration
Configuring the OpenCom 100
76
7.1.1 First Configuration via Serial Port
The serial port can also be used as alternative access for the first configuration. To
do this, the V.24 interface card must be installed. Additionally, you require a
crossed serial line with RJ45 plug (“null modem”).
1.
Install the “occonfig” program from the product CD. To do this, you must log on
as an administrator under Windows NT or Windows 2000/XP.
2.
Shut down the PC. Remove all connected network leads. Connect the serial
port of the PC to the COM port of the OpenCom 100.
3.
Restart the PC. Set up a dial-up link with the icon configured on the desktop
under step 1. Enter “Administrator” without a password as your user name.
4.
Start the Web browser. Enter “http://192.168.99.254/” in the address box.
You will see the log-on page of the Web console. Enter the user name “Administ-
rator” without a password for the initial configuration.
7.2
Configuring the OpenCom 100
7.2.1 Preparing the Configuration
Before starting with the configuration, make sure you have the following docu-
ments at hand:
■
An overview of the ports
■
A list of the terminals to be connected
■
A list of the IPEIs, if you wish to log on DECT terminals in the secure procedure
■
A list of the users to be set up (staff entitled to use the services of the
OpenCom 100) with their names, departments, and the internal call numbers
you want to allocate to them
■
For Internet access: the Internet service provider access data.
Summary of Contents for OpenCom 130
Page 1: ...130 OpenCom100 131 150 Mounting and Commissioning User Guide ...
Page 10: ...8 ...
Page 202: ...Index 200 Notes ...
Page 203: ......
