manualshive.com logo in svg

DETEWE OpenCom 130, User Manual

The DETEWE OpenCom 130 is a cutting-edge communication system that offers exceptional functionality and ease of use. To properly install and set up this device, you can easily access the Mounting And Commissioning Manual, available for free download on our website. This comprehensive manual will guide you through every step of the process, ensuring a seamless setup experience for your convenience.

Share
Download
background image

Configuration Examples

Useful Information on Internet Access

96

8.6

Useful Information on Internet Access

8.6.1 Costs

The OpenCom 100 uses a router function to access the Internet, which means that 
it automatically establishes an Internet connection when required and terminates 
the connection after a certain period of time if no data are being transmitted.

Unfortunately, programs other than those typically intended to access the Internet 
(such as your browser or your e-mail software) may send out data packets which 
cause an Internet connection to be established, even if these programs are not 
strictly Internet-associated applications.

Examples of such programs are the Microsoft

TM

 XP

TM

 operating system, various 

multimedia programs such as Realplayer

TM

 and anti-virus applications that may 

establish an Internet connection for automatic updates (the so-called “phone 
home function”).

It is therefore highly advisable to limit ISP access by specifying the maximum 
monthly connection time under 

Connection time per month (maximal)

 in the 

NET Configuration

: 

WAN

: 

[Provider]

 menu on the web console.

8.6.2 Using the Web

A Web browser not only enables you to use the OpenCom 100 

Configurator

 from 

every workstation but also to obtain a wealth of information from the Internet. 
Simply enter the desired URL in the address field of the browser. Access from a 
stand-alone PC via an online service differs from Internet access via the 
OpenCom 100 in the following respects:

■

When you request a Web page, dialling in results automatically. There is no 
display of dialogues with manual confirmation of dialling in or hanging up.

■

Requesting Web pages is not a connection-orientated service. When the Web 
page has been loaded completely, the TCP/IP connection is cleared. If you do 
not request further Web pages, the OpenCom 100 automatically releases the 
connection to the Internet after a certain, specifiable duration.

■

It is possible to call up Web pages simultaneously from several workstations.

Summary of Contents for OpenCom 130













































































































































































































Reviews:

No comments

Related manuals for OpenCom 130

S&S Northern Merlin 1000VW+ Installation, Operating And Maintenance preview
Merlin 1000VW+
Brand: S&S Northern Pages: 9
Yealink CP935W Quick Start Manual preview
CP935W
Brand: Yealink Pages: 8
Concertone RV2003H Operating Instructions Manual preview
RV2003H
Brand: Concertone Pages: 12
Audipack VCL-1UP Installation Manual preview
VCL-1UP
Brand: Audipack Pages: 12
DAPAudio 1U fan unit Manual preview
1U fan unit
Brand: DAPAudio Pages: 12
Invacare LINX ACU User Manual preview
LINX ACU
Brand: Invacare Pages: 45
Parker 2003-CB-00 Technical Manual preview
2003-CB-00
Brand: Parker Pages: 47
Hioki 8420-51 Quick Start Manual preview
8420-51
Brand: Hioki Pages: 52
Altronic DE-3000+ Series Operating Instructions Manual preview
DE-3000+ Series
Brand: Altronic Pages: 77
Neol ePowerSwitch 8 Master Manual preview
ePowerSwitch 8 Master
Brand: Neol Pages: 2
Fasel Elektronik FCU-EXT-APP-CONTROL Installation preview
FCU-EXT-APP-CONTROL
Brand: Fasel Elektronik Pages: 2
Waversasystems WMiniDAC MK2 Owner'S Manual preview
WMiniDAC MK2
Brand: Waversasystems Pages: 24
CAI Countryman Type 10S Stereo Direct Box Manual preview
Countryman Type 10S Stereo Direct Box
Brand: CAI Pages: 16
JDS Uniphase Talk-N-Trace TM-110 User Manual preview
Talk-N-Trace TM-110
Brand: JDS Uniphase Pages: 20
RCA RS2128iH User Manual preview
RS2128iH
Brand: RCA Pages: 2
RCA RS2531 User Manual preview
RS2531
Brand: RCA Pages: 16
Philips OccuSwitch Wireless Installation Manual preview
OccuSwitch Wireless
Brand: Philips Pages: 2
Philips LDTS07 User Manual preview
LDTS07
Brand: Philips Pages: 10

Brands by name

Popular brands

Load more brands