DETEWE OpenCom 130, User Manual

Page: 188 / 204

Frequently Asked Questions Internet
186
It is possible to redirect incoming connections in the Configurator , menu NET
Configuration : Port Forwarding . You should secure the redirection target (PC or
server) with a suitable firewall software.
It is not possible to access the Internet with the OpenPhone 27.
The requirement for this is that the set should be configured as data .
The telephone number used by the OpenPhone 27 to establish an Internet con-
nection must also be specified in the respective user profile (
Configurator , User
Manager: User menu).
With the OpenPhone 27, the Internet can be accessed either directly via the
remote data transfer network or indirectly via RAS access on the OpenCom 130/
150. For direct access you can directly dial any provider. Indirect access uses the
routing function of the OpenCom 130/150, accompanied by the configured
security features, for example.
Directly via remote data transfer network
If the Internet is accessed directly via the remote data transfer network, make sure
that
■
the remote data transfer network is properly installed on your PC and that the
correct ISP access data is configured,
■
the internal number used by the OpenPhone 27 to establish the data con-
nection is configured for outgoing call distribution (
Configurator , PBX Confi-
guration: Call Distribution: Outgoing menu).
Indirectly via RAS access
If the Internet is accessed indirectly via RAS, the system administrator should make
sure that:
■
permission has been given for Internet access via RAS ( Configurator , Net Con-
figuration: Firewall menu),
■
an internal number is configured for RAS access ( Configurator , Net Configu-
ration: Connections: RAS menu),
■
your user group has been granted RAS access rights ( Configurator , User
Manager: User Groups menu).