REMOVAL
Remove the entire arms and negative brake cylinders.
For details, see «CHECKING WEAR - REPLACING DISCS AND
BRAKE SEALS».
Only if need removing or adjusting.
Mark the position of the ring nuts (1). Remove screws (3) and ring
nut checks (2).
Only if need removing or adjusting.
Heat the ring nuts (1) uniformly to a temperature of about 80 ëC.
Only if need removing or adjusting.
Using tool
T12
, loosen and remove the ring nuts (1).
NOTE.
Accurately remove any trace of sealant from the threads of
ring nuts and intermediate covers.
Tighten two safety M16 studs in the main body.
Loosen and remove the check screws (5) of intermediate cover (4)
on gear ring side.
Support the differential unit and separate the intermediate cover (4)
from the main body (6).
Remove cover (4).
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
78
REMOVING AND DISASSEMBLING THE DIFFERENTIAL UNIT - RIMOZIONE E SMONTAGGIO GRUPPO DIFFERENZIALE -
DIFFERENTIALAGGREGAT ABNEHMEN UND ABMONTIEREN - REMOCION Y DESMONTAJE GRUPO DIFERENCIAL -
DEPOSE ET DEMONTAGE DU GROUPE DIFFERENTIEL
F1241852
F1241760
1
2
3
F1241865
1
F1241761
T12
1
F1241762
4
5
F1241763
4
6