Using a wrench, tighten two screws (36) in an alternate manner by
1/4 turn at a time in order to compress the Belleville washer (24)
and release the braking discs.
The stroke required for brake release corresponds to 1 turn.
ATTENTION!
Do not exceed this value.
ADJUSTMENTS AFTER MANUAL RELEASE
Remove screws (36) along with nuts (37) and seals. Replace seals
(39), lubricate screws (36) with silicone-based TECNO LUBE 101
grease and re-install the screws along with nuts.
Adjust jut of screw heads (36) in relation to the arm by 32
1
mm.
Lock screws (36) in position with check nuts (37).
ATTENTION!
Check screw jut over with maximum care.
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
30
ASSEMBLING BRAKING UNITS AND ARMS - ASSEMBALGGIO GRUPPI DI FRENATURA E BRACCI - ZUSAMMENBAU DER
BREMSAGGREGATE UND ARME - ASEMBLAJE GRUPOS DE FRENATURA Y EJES - ASSEMBLAGE GROUPES DE FREINAGE ET BRAS
F1241843
36
F1241844
36
39
37
F1241845
32
+1
0
36
F1241842
37
36