Remove arm (4) along with brake discs pack (8).
Lay the arm on a work bench.
Loosen check and guide screws (9) of thrust disc (10).
ATTENTION!
Loosen screws (9) in several stages, sequentially
and progressively.
Remove the thrust disc (10) along with screws (9) and springs (11).
NOTE.
Note down direction of installation.
Remove in sequence: first intermediate disc (12), friction disc (13)
and second intermediate disc (15).
ATTENTION!
Check friction disc thickness; if thickness is 5 mm or
less, replace discs on both sides.
Remove both coupling (14) and friction disc (16) at the same time.
ATTENTION!
Note down direction of installation of coupling (14) in
relation to brake disc (16).
Remove end counter plate (17).
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
16
CHECKING WEAR - REPLACING DISCS AND BRAKE SEALS - CONTROLLO USURA - SOSTITUZIONE DISCHI E TENUTE FRENI
VERSCHLEISS KONTROLLIEREN - SCHEIBEN UND DICHTUNGEN DER BREMSEN AUSWECHSELN - CONTROL USURA - SOSTITUCION DISCOS
Y RETENCION FRENOS - CONTROLE USURE - REMPLACEMENT DES DISQUES ET JOINTS D'ETANCHEITE FREINS
F1241663
4
8
F1241664
9
10
F1241665
10
11
9
F1241666
12
13
15
F1241667
14
16
F1241668
17