Using tools
T3
and
T4
, introduce the seal ring (9) and bearing (7)
into the bushing (5).
NOTE.
Check direction of installation of seal (9) carefully.
Install the snap ring (6) of bearing (7).
Install the complete bushing (5) onto the twin U-joint and set
bushing into position with a plastic hammer.
ATTENTION!
Tap around the whole rim.
Fit the snap ring (4) of the bushing kit (5); position the O-ring (8) as
well.
Introduce the twin U-joint (3) into the arm and lock into position with
dowel (2) coated with Loctite 242.
Tighten dowel to a max. torque of 15 Nm.
Apply Loctite 242 to the jutting portion of the dowel (2) and tighten
nut (1).
Tighten nut (1) to a torque of 60±70 Nm while holding dowel (2) in
position.
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
44
INSTALLING THE TWIN U-JOINT - INSTALLAZIONE DOPPIO GIUNTO CARDANICO - INSTALLATION DER DOPPELGELENKWELLE -
INSTALACION DOBLE JUNTO CARDANICO - INSTALLATION DOUBLE JOINT DE CARDAN
F1241711
T4
T3
5
F1241712
6
7
F1241713
5
F1241708
4
5
F1241714
3
2
F1241715
1
2
1 2