If required, remove the steering piston stroke centring sensor (1).
Loosen the check nuts (2) on the joints (3) of the steering bars (4).
Remove nuts.
NOTE.
Should the joint rotate, hold it with a hex. wrench inserted in
the seat provided.
ATTENTION!
The self-locking nuts (2) must be replaced once
every 5 disassemblies.
Using a puller, disconnect the tapered pins of the joints (3) from the
steering cases (5).
Disconnect left and right steering bars from piston (6).
ATTENTION!
To ease bar removal, heat the threaded portion of
the piston to approx. 100 ëC with a heat gun.
Loosen and remove the check screws (7) of steering cylinder (8).
Extract the steering cylinder (8) using a plastic hammer.
NOTE.
For cylinder disassembly, see «DISASSEMBLING THE
STEERING CYLINDER».
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
60
REMOVING THE STEERING CYLINDER - RIMOZIONE CILINDRO DI STERZATURA - LENKZYLINDER ABMONTIEREN -
REMOCION CILINDRO DE DESVIO - DEPOSE CYLINDRE DE DIRECTION
F1241853
1
F1241744
2
3
4
F1241854
7
8
F1241855
8
F1241745
3
5
F1241746
6