Only in case of clutch pack replacement: make up the packs with
increased shims (12), clutch discs (13), intermediate discs (14) and
shims (6).
ATTENTION!
Add shims (6) until a total size of 17.6 0.05 mm is
obtained.
Fit shims (6) and clutch pack (11) sequentially.
ATTENTION!
When installing the increased shim, place shim so
that it leans against the crown wheel (8, 10).
Install crown wheel (10).
Fit the planet wheel set (9).
NOTE
. Make sure that spherical thrust washers (15) are present.
Mount crown wheel (8).
Fit increased shim (12), clutch pack (7) and shims (6) onto the
crown wheel (8).
Fit the upper half box (5) and make sure that the match marks line
up.
Complete the assembling operation and install the differential unit
following the procedures described in the first part of the manual
under section «ASSEMBLING THE DIFFERENTIAL UNIT».
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
130
ASSEMBLING AND INSTALLING THE LIMITED SLIP (45%) DIFFERENTIAL -MONTAGGIO ED INSTALLAZIONE DIFFERENZIALE A SLITTAMENTO
LIMITATO (45%) - DIFFERENTIAL MIT BEGRENZTEM GLEITVERMOÈGEN (45%) MONTIEREN UND INSTALLIEREN - MONTAJE Y INSTALACION
DIFERENCIAL A DDESLIZAMIENTO LIMITADO (45%) - MONTAGE ED INSTALLATION DIFFERENTIEL A GLISSEMENT LIMITE (45%)
F1241913
8
9
15
F1241902
10
D1240241
10
8
14
12
6
13
F1241901
6
11
F1241904
6
12
7
8
5