NOTE.
Perform brake adjustment on both sides of the axle
Loosen the lock nuts (34) and unscrew by a few turns.
Introduce pressure at 20±30 bar into the service brake.
Turn the adjusting screws (36) anti-clockwise until they lean
against the pressure plate.
Clearance between discs = 0 mm
ATTENTION!
Turn the screws gradually and by the same measure
until a max. torque of 10 Nm is obtained.
Once the jut of the three screws (36) has been checked and found
to be equivalent, turn the screws clockwise to restore disc
clearance:
1 turn = 1 mm
3/4 of a turn = 0.75 mm
As you hold the screws (36) in position, lock the nuts (34).
Nut tightening torque: MAX 15 Nm
Release pressure from service brake.
GB
GB
GB
GB
GB
GB
a
b
c
d
f
e
124
ADJUSTING THE SERVICE BRAKE - REGISTRAZIONE FRENO DI SERVIZIO - HILFSBREMS EINSTELLEN -
REGISTRACION FRENO DE SERVICIO - REGLAGE DU FREIN DE SERVICE
D1240242
34
35
36
38
37
45
F1241927
36
F1241900
34
F1241899
36