![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067067.webp)
NOTE:
Do not allow
the flexible hoses to
kink or crimp.
✐
Connecting the Heat Sources
Hopper Temperature Controller (HTC) as Heat
Source
NOTE:
If your EnergySmart Dryer System was supplied with a GasTrac as the heat
source,
see Installation section entitled, Connecting the Heat Sources, Gastrac Heat
Source.
1
Using insulated hard piping or flexible hose, connect the HTC outlet to
the air inlet of the CH Hopper.
If flexible hose is used, make sure it is
securely clamped.
Make sure all hoses are securely clamped to
prevent wasteful leaking. The hoses should be
routed neatly and supported where possible to
prevent undue stress on the heater and hopper
assemblies. Also, the bends should be made
with gradual radiuses. Sharp turns will cause
undue pressure drops.
✐
HTC Outlet to CH
Hopper Inlet
Connection
I n s t a l l a t i o n - P i p i n g / H o s e s l
3-37
3
In
st
al
la
tio
n
(continued)
An optional hard piping kit for
your EnergySmart Dryer system
is available from Conair.
Contact Conair Parts
(800) 458 1960
From outside of the
United States, call:
(814) 437 6861
Summary of Contents for HTC 120
