![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067207.webp)
4
O
p
er
at
io
n
O p e r a t i o n l
4-65
Adjusting the Energ ySmart Dr yer
System
(continued)
Without OptiMizer
TM
Mode
Any changes made to the setpoint temperature or air flow will affect the on time
value shown. To minimize energy usage, Conair recommends using the lowest
setpoint temperature that is required to dry your material and maintain the
required material throat temperature. In situations where the incoming material
moisture content is low (1000 ppm or less - Winter) you will be able to run
lower setpoint temperatures.
Changes to setpoint temperatures will affect the material temperature profile
and the hopper outlet temperature.
(continued)
✐
NOTE:
Making too large of a
change in setpoint will change
the material throat tempera-
ture too fast for the process-
ing machine to react. This
may cause changes to barrel
temperatures, back pressures,
and injection pressures.
Summary of Contents for HTC 120
