![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067205.webp)
4
O
p
er
at
io
n
O p e r a t i o n l
4-63
Adjusting the Energ ySmart Dr yer
System
(continued)
Without OptiMizer
TM
Mode
Too large of a change to the air flow can cause an alarm at the heater (HTC or
CGT). It will take several hours for the material temperature profile
(See
Drying Monitor screen (Screen 7))
in the hopper to stabilize based on a change
in air flow.
The change in air flow will also affect the return air temperature. Increasing
air flow will also increase the hopper outlet temperature.
It is common to see changes in air flow based on the optional receiver dumping
material into the top of the hopper. This is due to changes in the system pres-
sure when the receiver valve opens. This change in pressure changes the pres-
sure drop of the system and is normal.
.
(continued)
Summary of Contents for HTC 120
