Conair HTC 120, User Manual

Page: 176 / 330

4-34 l O p e r a t i o n
Control Function Descriptions
(continued)
Screen 19 - Main Setup Screen
To access the Main Setup Screen (Screen 19):
1
Press the "Setup" button
located on the right side of Login Screen (Screen 1B),
after logging in at the appropriate user level.
The Main Setup screen allows the user to change the system’s measurement unit
usage (English or Metric), system pipe size (8 and 12 inch {20.3 and 30.5 cm}) and
the touch screen control’s clock.
To set the dryer control units and system pipe size:
1
Use the up and down arrow buttons to make the selection.
The current selection
will be indicated by a yellow triangle.
2
Press the “Enter” button to lock in the current selection.
To update/change the dryer control’s clock:
1
Press the appropriate box under its heading. Use the pop-up keyboard win-
dow to enter the new time and date, and press the “Enter” key to lock in the
time.
2
Press the “Update” button to update the control’s clock.
NOTE: Set points boxes are white
with heavy black borders. Set
points can be changed, if the user
has logged in at the proper securi-
ty level, by pressing the setpoint
boxes. This will launch a pop-up
keypad window that can be used
to change the setpoint.
See
Operation section entitled,
Example Set Point Change.
After
the new setpoint value has been
entered, press the
"Enter"
key to
lock in the new setpoint.
✐
(continued)