![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067079.webp)
3
In
st
al
la
tio
n
I n s t a l l a t i o n - P i p i n g / H o s e s l
3-49
Installing the Return Air Dew Point
Line
The return air dew point line allows the dehumidifying dryer to monitor the mois-
ture contained in the air leaving the CH Hopper via the dry air return port. If the
line is not installed correctly, dew point readings will be inaccurate.
1
Install the dew point line fitting
into the port located at the dry
air return circuit as it leaves the
CH hopper and before it enters
the optional cyclone.
2
Connect the supplied short (3 to
4 ft {0.9 to 1.2 m}) copper tube
to the dew point line fitting.
Route the copper tube down
towards the EnergySmart Dryer.
The copper tube is needed to dissi-
pate heat from the sample air.
3
Connect the supplied Teflon
®
tubing to the end of the copper
tube using the compression fit-
ting supplied.
Route the Teflon tubing towards
the Return Air Dew Point fitting on the back of
the
EnergySmart Dryer.
4
Cut the supplied Teflon tubing to the proper
length
.
5
Connect the Teflon tubing to the Return Air
Dew Point fitting on the back of the
EnergySmart Dryer.
NOTE:
The small fitting to the left of the Return
Air dew point fitting on the back of the dryer
allows the dew point to be checked with a hand
held device.
✐
Dew Point Line
Fitting
Summary of Contents for HTC 120
