4-72
l O p e r a t i o n
Stopping the Energ ySmart Dr yer
System
(continued)
To stop the EnergySmart Dryer System using “System Cool down”:
1
Stop the processing machine and stop taking material out of the hopper.
2
Navigate to the System Control Screen (Screen 8).
3
Press the "System Cool down" button on the System Control Screen
(Screen 8.)
When the System Cool down function is used, the heater (HTC or GasTrac) will
immediately be turned off. The blower in the EnergySmart Dryer regen circuit will
continue to run for the amount of time set in the System Cool down timer. The
time can be set from 1 to 24 hours. If equipped, the temperature probe option can
be selected for the Cool Down function.
4
Disconnect and lock out the main power
if you have stopped the system to per-
form maintenance or repair.
NOTE:
If the operator presses
the “Stop System” button and
then decides use the System
Cool down Function, the
“System Start” button will
have to be pressed, then the
“System Cool down” button.
✐
ON
O
O
FF
(continued)
Summary of Contents for HTC 120
