![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067266.webp)
Cleaning the Burner Sight Glass of
the GasTrac
A dirty sight glass prohibits inspection or viewing of the metal-ceramic burner
during operation.
To clean the sight glass:
1
Stop the GasTrac.
Press the red
“STOP” button, then press the rock-
er switch to “OFF.”
2
Disconnect and lock out the main power.
3
Remove the screws on the sight glass bracket.
4
Clean the sight glass.
Use a clean soft cloth or cotton
swab moistened with alcohol.
5
Coat the screw threads with a high-temperature
antiseize compound.
6
Replace the sight glass.
Tighten the screws in the
bracket to hold the glass in place.
Warning: Hot surfaces.
Allow the GasTrac to cool
before removing the
burner guard to perform
maintenance.
ON
O
O
FF
Replacement sight glasses are
available from Conair.
Contact Conair Parts
(800) 458 1960
From outside of the
United States, call:
(814) 437 6861
5-16
l M a i n t e n a n c e
Summary of Contents for HTC 120
