![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067201.webp)
4
O
p
er
at
io
n
O p e r a t i o n l
4-59
Starting the Energ ySmart Dr yer
System
(continued)
Without OptiMizer
TM
Mode
6
Navigate to the Process Heater: Dehumidified Air Circuit Screen
(Screen 3) within the dryer’s control.
7
Enter the Pre-dry Delivery Air Temperature that is to be used with your
material.
Pre-drying temperatures are specific to the type of material that is
processed, consult your material supplier for recommended pre-drying
temperatures.
(continued)
NOTE:
Screen 3 shows the type of
heater installed in the Dehumidifying
Drying Circuit of the EnergySmart
Dryer System. If a GasTrac has been
installed, the image on the screen will
reflect a gas heater (flame). If an HTC
has been installed, the image on the
screen will reflect an electric heater
(heating coil). The screen used in this
example reflects an electric heater
(heating coil).
✐
NOTE:
Set points boxes are white with
heavy black borders. Set points can
be changed, if the user has logged in
at the proper security level, by press-
ing the setpoint boxes. This will launch
a pop-up keypad window that can be
used to change the setpoint.
See
Operation section entitled, Example Set
Point Change.
After the new setpoint
value has been entered, press the
"Enter"
key to lock in the new set-
point.
✐
Summary of Contents for HTC 120
