![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067285.webp)
Cleaning the Cyclone Separator
(optional)
A filled cyclone separator barrel will negatively affect air flow and the
EnergySmart Drying System's efficiency. Cleaning frequency depends on how
much material you process and how dusty and full of fines it is.
NOTE:
Turn off the EnergySmart Drying System and allow it to cool before attempting
any maintenance.
1
Turn off and lock out the power to the EnergySmart Drying
System and its components.
2
Release the four (4) latches securing the cyclone separator barrel’s lid
by
pulling down on each latch. As the latches are released, a "hook" will still be
holding the lid to the barrel.
3
Lift up on the lid and release the "hooks" holding the lid to the barrel.
4
Empty any material from the barrel into an appropriate container.
Remove
any dust that clings to the inside of the barrel with a cleaning cloth.
5
Reinstall the lid
by engaging the barrel latch hooks. Once all for "hooks" are
engaged, lift up on the latches to secure the lid to the barrel.
M a i n t e n a n c e l
5-35
5
M
ai
n
te
n
an
ce
✐
Latch (4)
Summary of Contents for HTC 120
