![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067203.webp)
4
O
p
er
at
io
n
O p e r a t i o n l
4-61
Starting the Energ ySmart Dr yer
System
(continued)
Without OptiMizer
TM
Mode
11
Monitor the temperature readout profile on to the Material Temperature
Trending Screen (Screen 9)
until the material temperature within the hopper
reaches and maintains a steady state (approximately 4 to 6 hours).
12
Start the injection processing/extrusion machine,
after the normal pre-dry
time is complete (approximately 4 to 6 hours). The injection machine will
begin taking material out of the hopper. As the system is running it will take
several hours for all components to reach a steady-state running condition.
Conair recommends waiting until the system is in a constant steady state
before making changes to temperature and air flow setpoints.
Summary of Contents for HTC 120
