![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067252.webp)
5-2
l M a i n t e n a n c e
Preventative Maintenance
Checklist
Routine maintenance will ensure optimum operation and performance of the
EnergySmart™ Dryer System and its components. Conair recommends the
following maintenance schedule and tasks.
• Whenever changing materials
.
❒
Drain and clean the CH Hopper.
❒
Clean the optional receiver(s) that fills the hopper
(see the appropriate
receiver user guide.)
❒
Clean the optional receivers’ filter(s).
If you are running a dusty material or
regrind you may need to check and clean the screen filter more often. If the
material flow is erratic or sluggish, check the filter.
❒
Change the GasTrac’s setpoint. (If necessary)
❒
Change the HTC’s setpoint. (If necessary)
❒
Change the Drying Monitor’s setpoint entries on the control.
Verify that
the temperature settings are correct for the new material.
❒
Inspect the Drying Monitor probe and mounting assembly.
If the probe is
damaged, replace it. If vibration has loosened the probe’s mounting hardware,
tighten as necessary.
❒
Empty and clean the optional cyclone separator’s collecting tank.
❒
Empty and clean the optional dust collector’s dust filter.
✐
NOTE:
For detailed maintenance
instructions for the components
of the EnergySmart Dryer
System, refer to the individual
component manuals supplied
with the system.
(continued)
Summary of Contents for HTC 120
