4-50
l O p e r a t i o n
Control Function Descriptions
(continued)
Screen 35 - Read Data Communications Setup Screen
To access the Read Data Communications Setup Screen (Screen 35):
1
Press the "Comms Read” button
located on the left side of the Comms Setup
Screen (Screen 34).
The Read Data Communications Setup screen provides the user with a summary of
the communications settings, status and any errors being "read" within the dehumidi-
fying drying circuit of the EnergySmart Dryer System. It allows the user to "Enable"
the data read function (indicated by a green LED) or "Disable" the data read function
(indicated by a red LED) with the following components within the EnergySmart
System by touching the applicable buttons:
• Dry Air Blower
• Dry Air GasTrac (Gas Heater Only)
• Dry Air Burner (Gas Heater Only)
• Dry Air Electric HB (HTC Only)
• Turbo Blower
• Turbo Electric (HB)
This screen also allows the user to see the error count for each communications func-
tion, the "Comms (Communications) Retry Counter" setpoint and to reset the error
counters ("Reset Error CT" button) for the dehumidifying drying circuit. If the user is
logged-in at the proper security level, the "Comms (Communications) Retry Counter"
setpoint can be changed on this screen.
NOTE:
Set points boxes are white
with heavy black borders. Set
points can be changed, if the user
has logged in at the proper security
level, by pressing the setpoint
boxes. This will launch a pop-up
keypad window that can be used to
change the setpoint.
See Operation
section entitled, Example Set Point
Change.
After the new setpoint
value has been entered, press the
"Enter"
key to lock in the new set-
point.
✐
(continued)
Summary of Contents for HTC 120
