Checking the Gas and Electrical
Systems of the GasTrac
1
Check all electrical connections.
❒
Shut off power to the unit and verify that the GasTrac and its burner
controller is adequately grounded. Inadequate grounding can cause con-
troller error messages and nuisance alarms.
❒
With power off to the GasTrac and the EnergySmart Dryer, verify that all
terminal connections are tight and all new wiring is secured with an
appropriately-sized strain relief.
2
Check gas piping and ducting.
❒
Verify that the gas delivery piping is rigidly supported.
❒
Verify that exhaust gas ducting is secured, adequately insulated, and free
of leaks.
3
Check the GasTrac’s fuel train for leaks. Turn on the gas supply to the
GasTrac.
Open the primary gas shutoff valve. Use a gas leak detection device
or a squirt bottle of soapy water to detect leaks around gas pipe and fitting
joints. Open the secondary gas shutoff valve and continue checking for leaks
using the same procedure.
WARNING:
Ensure all gas lines are free of leaks. To prevent accident or injury, all
gas lines, including the GasTrac’s factory-mounted gas train, should be checked for
leaks before firing the burner.
3-102
l I n s t a l l a t i o n - Te s t i n g
WARNING:
All wiring, disconnects and fuses should be installed by
qualified electrical technicians in accordance with electrical codes in your
region. Always maintain a safe ground. Do not operate the equipment at
power levels other than what is specified on the machine serial tag and
data plate.
ON
O
O
FF
NOTE:
When connected to an
ES-1 System, the GasTrac
must operate in English units.
✐
Summary of Contents for HTC 120
