Conair HTC 120, User Manual

Page: 99 / 330

3
In
st
al
la
tio
n
I n s t a l l a t i o n - C o n t r o l & C o m m u n i c a t i o n W i r i n g l
3-69
Connecting the HTC to the HTC
Controller
(continued)
6
Insert the heater power wire through a knockout in the side or bottom of
the HTC control center.
Secure the wire with an appropriately-sized strain
relief, if conduit is not used.
7
Connect the heater power wires to the control center’s terminal block and
heater ground wire to the ground lug as shown.
8
Insert the other end of heater power wire through the knockout in the side
of the heater assembly.
Secure the wire with an appropriately-sized strain
relief, if conduit is not used.
9
Connect the heater power wires to the top terminals of the heater assem-
bly’s terminal block and heater ground wires to the ground lug as shown.
Power Wires
(Customer
Supplied)
Ground WIres
(Green - Customer
Supplied)
Ground Wires
Green
Insert the Power Wires Here