![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067086.webp)
3-56
l I n s t a l l a t i o n
Connecting Main Power to the
GasTrac
1
Open the GasTrac electrical enclosure.
Turn the disconnect dial on the GasTrac’s
door to the Off or “O” position. Turn the captive screw, and swing the door open.
2
Insert the main power wire through
the knockout in the electrical enclo-
sure.
Secure the wire with an appro-
priately-sized relief.
3
Connect the power wires to the
three (3) terminals at the top of the
disconnect holder.
4
Connect the ground wire to either
grounding point shown in the dia-
gram.
Honeywell
ESC SEL
IMPORTANT:
Always refer
to the wiring diagrams
that came with the
GasTrac before making
electrical connections.
CAUTION: Electrical Hazard.
Always disconnect and lock out the main power
sources before making electrical connections. Electrical connections should be
made only by qualified personnel.
ON
O
O
FF
Summary of Contents for HTC 120
