![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067256.webp)
Preventative Maintenance
Checklist
(continued)
• Ever y six months.
❒
Inspect all gaskets for damage or wear.
Damaged gaskets can allow
moisture to seep into the closed-loop drying system. Replace any gasket that is
torn or cracked.
❒
Inspect all piping, wiring and electrical connections.
Check for leaks,
corrosion and loose connections. Replace any component that shows
signs of damage or wear. Tighten loose connections.
❒
Inspect all receiver wiring connections.
Power and cable connections
between the loading control and optional receiver may become loose or wires
may become worn. Tighten any loose connections and replace any wire or
cable that has become worn or damaged.
❒
Inspect the receiver(s) installation.
Check installed mounting hardware to
make sure that the installation is secure
.
❒
Check the vacuum pump’s relief valve for proper operation.
The vacuum
relief valve is designed to protect the pump from damage if the conveying line
becomes clogged or obstructed.
❒
Inspect the GasTrac’s metal-ceramic burner.
While the unit is fired,
look through the sight glass at the burner. The burner surface should be
glowing orange with an even flame. Blue flames, flames projecting from
the burner surface, or cracks or dark spots on the burner surface indicate
damage, replace the burner as necessary.
❒
Empty and clean the optional cyclone separator’s collecting tank.
❒
Empty and clean the optional dust collector’s dust filter.
✐
NOTE:
For detailed maintenance
instructions for the components
of the EnergySmart Dryer
System, refer to the individual
component manuals supplied
with the system.
(continued)
5-6
l M a i n t e n a n c e
Summary of Contents for HTC 120
