4
O
p
er
at
io
n
O p e r a t i o n l
4-91
Using the OptiMizer™
(continued)
OptiMizer™ Setup
Before the OptiMizer™ function is started, the operator should confirm that the
setup parameters are set properly. These parameters are factory set at predeter-
mined default settings and normally do not need changed. However, it is impor-
tant to become familiar with these settings and confirm they are set accordingly.
The actual OptiMizer™ enable is on the ‘System Control’ HMI screen. On this
screen the Enable/Disable OptiMizer™ button is at the bottom of the screen as
shown below. When the OptiMizer™ is enabled, the system performs the func-
tions associated with the OptiMizer™. The OptiMizer™ needs to be disabled
when manual dryer operation is desired.
System Control Screen
In order to find the OptiMizer™ settings screens on the ES1 control HMI:
1
Go to the Login screen.
2
From the Login screen,
login under the “Super” level user name and pass-
word.
3
Use the following navigation button path
Setup
>
Main Setup > Equipment
Setup
>
OptiMizer™. This navigation path is shown on the following screen
shots.
(continued)
Summary of Contents for HTC 120
