![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067204.webp)
4-62
l O p e r a t i o n
Adjusting the Energ ySmart Dr yer
System
(continued)
Without OptiMizer
TM
Mode
Once your system is running and is in a constant steady state, you can now
adjust air flow if desired.
To adjust air flow:
1
Navigate to the Dehumidifying Dryer Screen (Screen 4).
2
Adjust the air flow setpoint of the dryer’s process blower.
The output of
the dryer’s process blower is regulated by a variable frequency drive (VFD).
The VFD can lower blower’s total output to match your processing machine’s
throughput, reducing power consumption. The air flow can be adjusted manu-
ally or automatically. By setting the air flow from Manual mode (%) to
Automatic mode (CFM setpoint) the control will automatically set the
CFM setpoint to be equal to the value it was running as a percentage. The
same is true when switching from Automatic mode to Manual mode. The
control will set the % equal to the value it was running as a setpoint. This
is done so that the system is not interrupted when changing the air flow
control mode. You can choose to operate in either mode based on your
preference.
IMPORTANT:
When making changes to
air flow on a running system, be care-
ful not to make large changes (more
than 10%). Also give the system time
to stabilize each time a change is
made. Air flow changes will increase
or decrease the heater output and the
filter pressure drop.
(continued)
100 %
100 %
NOTE:
Conair recommends using
CFM or AutoControl.
✐
Summary of Contents for HTC 120
