Conair HTC 120, User Manual

Page: 245 / 330

4
O
p
er
at
io
n
O p e r a t i o n l
4-103
Using the OptiMizer™
(continued)
The bottom display section of this screen shows the setpoints of the currently
selected recipe (after the ‘View Recipe’ button has been pushed) and the setpoints
currently stored in the controller. The following is a description of the buttons
associated with the bottom recipe setpoints display.
The following table shows all of the setpoints and settings in a typical recipe.
Each setting and setpoint will have a description, minimum, and maximum range.
Shows the status of the current recipe function. The
download, upload, create, restore, save, and delete func-
tions show a status in this box that shows progress,
completion, and errors. After a function button has
been selected, a delay occurs before the system will
update the status.
Name Min Max Description
Pre-dry Airflow
(%) 20 100 Airflow, when in Pre-dry, used if the Variable
Speed Drive providing the airflow is in Fixed
Frequency (manual) mode.
Pre-dry Airflow
Flow (CFM) 200 5000 Airflow, when in Pre-dry, used if the Variable
Speed Drive providing the airflow is in PID
Control (automatic) mode. This is the recom-
mended mode of control for the airflow when
using OptiMizer™.
Pre-dry
Temperature (°F) 80 375 Air delivery temperature setpoint when in Pre-
dry.
Dynamic Airflow
(%) 20 100 Airflow setpoint for the Optimized recipe in
Ramp Down mode, used if the Variable Speed
Drive providing the airflow is in Fixed
Frequency (manual) mode.
Dynamic Airflow
Flow (CFM)) 200 5000 Airflow setpoint for the Optimized recipe in
Ramp Down mode, used if the Variable Speed
Drive providing the airflow is in PID Control
(automatic) mode. This is the recommended
mode of control for the airflow when using
OptiMizer™.
Dynamic
Temperature (°F) 80 375 Air delivery temperature setpoint for the
Optimized recipe in Ramp Down mode.
(continued)