![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067261.webp)
5
M
ai
n
te
n
an
ce
M a i n t e n a n c e l
5-11
Cleaning the Combustion Filter of
the GasTrac
You must clean the combustion air intake filter periodically. A clogged filter
reduces air flow through the combustion circuit, which reduces burner efficiency
and heat output.
To clean the filter:
1
Stop the GasTrac.
Press the red
“STOP” button, then press the rocker
switch to “OFF”.
2
Disconnect and lock out the main power.
3
Remove the filter shroud.
Remove the wing
nut and washer that holds the shroud in place.
Lift the shroud up and off.
4
Remove the filter.
Remove the wing nut and
washer that holds the filter in place. Lift the
filter up and off.
5
Clean the filter.
Vacuum debris from the filter
using vacuum.
6
Reassemble.
Repeat Steps 3 and 4 in reverse order to replace the filter.
ON
O
O
FF
Replacement filters are
available from Conair.
Contact Conair Parts
(800) 458 1960
From outside of the
United States, call:
(814) 437 6861
CAUTION: Wear eye protection.
If you use compressed air to
clean the equipment,
you must wear eye protection
and
observe all OSHA and other safety regulations pertaining to
the use of compressed air.
Summary of Contents for HTC 120
