![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067126.webp)
Checking for Proper Air Flow
IMPORTANT:
This procedure must be performed before loading material into the
hopper.
CAUTION:
If the air flow direction is incorrect due to improper phase connection,
material from the hopper can be pulled back into the dryer, causing permanent
damage to this equipment.
Opening and Closing the Dryer Doors (W1600 - 5000)
To unlock the side panel door bolts:
1
Rotate the two (2) locking door bolts on the dryer door counterclockwise
with a regular screw driver.
2
Close the dryer doors and rotate the two (2) locking door bolts clockwise
to resecure the dryer doors.
Testing for Proper Rotation
1
Turn on the main power to the dryer.
Make sure the dryer’s disconnect dial is in
the ON position. This powers up the control and the display will illuminate.
3-96
l I n s t a l l a t i o n - Te s t i n g
Dryer Door
Locking Bolts (2)
(W1600-5000)
(continued)
Summary of Contents for HTC 120
