![background image](http://html.mh-extra.com/html/conair/htc-120/htc-120_user-manual_2649067180.webp)
4-38
l O p e r a t i o n
Control Function Descriptions
(continued)
Screen 23 -Ethernet Setup Screen (optional)
To access the Ethernet Setup Screen (Screen 23):
1
Press the "Ethernet” button
located on the Equipment Setup Screen
(Screen 20).
The Ethernet Setup screen allows the user to configure the EnergySmart control to
communicate within their specific network.
To change any of the IP addresses above:
1
Press the grey text box for the specific parameter to be changed
(ML1400 IP
Address, ML1400 Subnet Mask and ML1400 Gateway Address).
2
Enter the new address within the pop-up keyboard window.
3
Press the “Enter” button to lock in the current selection.
4
Repeat Steps 1-3 for each address.
5
Cycle the dryer’s power after all changes are complete.
The user can also view the other system parameters, start the system, stop the system,
initiate a system Cool Down or return to the "Login" screen by pressing the applicable
buttons on the right of the screen.
NOTE:
Set points boxes are white
with heavy black borders. Set
points can be changed, if the user
has logged in at the proper security
level, by pressing the setpoint
boxes. This will launch a pop-up
keypad window that can be used to
change the setpoint.
See Operation
section entitled, Example Set Point
Change.
After the new setpoint
value has been entered, press the
"Enter"
key to lock in the new set-
point.
✐
(continued)
NOTE:
Consult your IT
Department for proper set-up of
the Ethernet parameters.
✐
Summary of Contents for HTC 120
