Conair HTC 120, User Manual

Page: 195 / 330

4
O
p
er
at
io
n
O p e r a t i o n l
4-53
Control Function Descriptions
(continued)
Screen 38 - Alarm Setup 2 Screen
To access the Alarm Setup 2 Screen (Screen 38):
1
Press the "Alarm Setup 2" button
located on the right side of the Main Setup
Screen (Screen 19).
The Alarm Setup 2 screen provides the user with a summary of the low, high,
minutes and hour setpoints and units of measurement associated with each of the
following alarms:
• Drying Monitor Temperature (T6)
• Drying Monitor Temperature (T5)
• Drying Monitor Temperature (T4)
• Drying Monitor Temperature (T3)
• Drying Monitor Temperature (T2)
• Drying Monitor Temperature (T1)
If the user is logged-in at the proper security level, all setpoints contained on this
screen can be changed using the pop-up keypad window.
The user can also view the other system parameters, start the system, stop the system,
initiate a system Cool Down or return to the "Login" screen by pressing the applicable
buttons on the right of the screen.
NOTE:
Set points boxes are white
with heavy black borders. Set
points can be changed, if the user
has logged in at the proper security
level, by pressing the setpoint
boxes. This will launch a pop-up
keypad window that can be used to
change the setpoint.
See Operation
section entitled, Example Set Point
Change.
After the new setpoint
value has been entered, press the
"Enter" key to lock in the new set-
point.
✐